Universal Remote Contorl MX-3000 User Manual

Programming Punch Through
MX-3000 Editor enables you to quickly set up common functions on all devices for the hard buttons. Usually used
only for Volume Up, Down and Mute; however, you may find it convenient to punch through to the satellite Menu
controls and the Channel UP and Down.
11
Open the Punch Through window by clicking on the shortcut button in the toolbar or by selecting
Punch Through from the Program Menu.
22
Select the devices which you want to change programming by clicking on them
while holding down the CONTROL key on the keyboard. If you want them all
selected (normal for Volume Up, Down and Mute), simply click on the Select All
button. Any device you select will be HIGHLIGHTED in the “Punch To” list.
33
Select the device that has the codes you want used in the Punch From list.
44
Click on SAVE. Check the devices you programmed, you should see the red PT (Punch Through) flag on
every button affected on all the devices you programmed:
TV VCR1 MAIN
55
Repeat for any other groups of codes as you like.
4444
PPuunncchh TThhrroouugghh
U
S
I
N
G
M
X
3
0
0
0
E
D
I
T
O
R
T
O
P
R
O
G
R
A
M

Universal Remote Contorl MX-3000 Specifications

General

Brand	Universal Remote Contorl
Model	MX-3000
Category	Remote Control
Language	English