Universal Remote Contorl RM-1 User Manual

Page 5
RM-1 OWNER’S MANUAL
Date/Time
The Date and Time are automatically sent from the
CP-1 to the RM-1. If you would like to adjust the
date or time you can do so on the remote control.
Note: Any Date or Time adjustment made on the
RM-1 will automatically go out to all the other
remotes and keypads in the system.
1. Change Date
: Tap the button beside Day, Month,
or Year, then use the numeric keypad to enter
in the new date information. When you are
finished, press the Save button.
2. Change Time
: Tap the button beside Hour or
Minutes, then use the numeric keypad to enter
in a new time. Set AM/PM by toggling the
button. When you are finished, press the Save
button.
3. Display Date/Time
: The RM-1 can display
either the Date or Time, but not both.
Select which one you would like to display.
Press the screen button next to Date or Time.
Once you are finished, press the Save button.
Erasing and Resetting
WARNING! Only use this button when instructed by Technical
Support. It resets the memory of the RM-1 to the factory condition. All
your programming will be lost!
To set the remote to its factory default setting,
press "Erase." A secondary screen opens and
requires your confirmation.

Universal Remote Contorl RM-1 Specifications

General

Brand	Universal Remote Contorl
Model	RM-1
Category	Remote Control
Language	English