Lane Master Manual
07/19/2017
12
4.4 Machine Installation
Before processing with assembly assure you have the following tools.
4.4.1 Marquee Installation
No.
Name Picture
Use for
1
Electric cross screwdriver
For Marquee
Installation& Connect
Lane Assembly
2
Wrench
3
Allen hexagon wrenches
Connect Lane Assembly
& Display Assembly
Step 2 Lift up the marquee above the display
frame. Note: It is recommended to have the minimum
of two staff members available for this installation.
Step 1 Place the marquee on the display
frame as shown and install hardware
where indicated by the red arrows.
P1
P2
To Next Page
Loading...
