Lane Master Manual
07/19/2017
33
8.5.3 Cleaning display
After disassemble the display part, soak the cloth and twist it dry until it is not dripping,
then gently wipe the display for several times.
Metal plate 1 (3 screws) Metal plate 2&3 (2 screws)
Metal plate 4 (2 screws)
Note: Please hold the plastic of the display when
removing metal plate 4 or it may drop down.
Please reassemble the display part in
reversed order. (4-3-2-1)
8.5.2 Disassemble marquee display
Loose all the screws on the surface of the marquee plastic, and make sure there is enough
space for placing the
plastic, avoid any scratch
to the plastic.
To Next Page
Loading...
