Universal MRF-350 User Manual

MRF-350 Installation Manual
Optimizing Narrow Band Reception with
the RFX-250 and MSC System Remotes

Universal MRF-350 Specifications

General

Brand	Universal
Model	MRF-350
Category	Remote Control
Language	English

Summary

Introduction

Features and Benefits

Interference Rejection and Extended RF Range via RFX-250

MRF-350 receives RF signals via RFX-250 Sensor, which displays interference via an LED.

Expand Range by Adding RFX-250 RF Sensors in Remote Areas

MRF-350 supports up to three RFX-250 sensors for expanded range.

Variable IR Output Matches Rear Panel IR Inputs

MRF-350 has adjustable IR line outputs with 3.5mm jacks for rear panel IR inputs.

Up To Fifteen Equipment Locations With Identical Components

MRF-350 controls components in different rooms via a base station per location.

A Single MRF-350 Can Control an Array of Identical Components or Identical Zones of a Multi Zone Preamp/Matrix Switcher

MRF-350 has six addressable IR outputs, expandable to 90 components with additional units.

IR Input for Keypads or IR Repeater Systems

Rear panel IR input relays data from repeaters or keypads to all IR outputs.

Parts Guide

Optimizing Range and Reliability

Connecting IR and Setting Output Levels

Front Blaster Overload

Disabling the Front Blaster - Step by Step via PC

Procedure for disabling the front blaster using the MX PC software.

Controlling An Array of Identical Components or Zones

Identical Components/Zones - Step by Step via PC

Guide to configuring identical components/zones using MX Editor software and RF setup.

Programming For Multiple Equipment Locations

Frequently Asked Questions

1. LIMITED WARRANTY AND DISCLAIMERS

2. URC'S LIMITATIONS OF LIABILITY

End User Agreement

Specifications