#)'
!
'1-#%+/)4*'#44'2+'3
Open the battery cover by pressing the release and pulling back the
cover on the back of the control. Remove the cover.
Observe the + and - polarity indications inside the battery compartment.
Place the four AA batteries into their positions in the battery compart-
ment, observing the + and - polarity indicators on the batteries.
Now, replace the battery cover by inserting the hinged end in first, then
snapping the cover back into place.
20)2#..+/)4*'!
To fully automate an audio/video system, the programmer must have a
detailed knowledge of each component and how the system is connect-
ed and operated. We highly recommend that you use a professional
audio/video installer to program your MX-450 so you will be able to
enjoy all the benefits of the MX-450.
20)2#..+/)14+0/3
The MX-450 is programmed via on-screen setup menus. Simply press
and hold the MAIN button for 3 seconds to view the menus:
Basic Setup: Selecting this option enables you to replace all your
remotes by either searching the built in database or
learning commands one at a time from the original
remote for the device.
Advanced Setup: Do not attempt Advanced Setup until you have com-
pleted Basic. Advanced Setup enables you to copy
and paste groups of commands like Volume and
Mute, setup macros, customize labels, add/hide
pages, erase and setup RF Addressing.
Favorite Channels: Do not attempt to setup Favorite Channels until you
have completed Basic. Favorite channels are
macros that enable you to tune to a channel with
one touch.
User Settings: Selecting this option lets you adjust how long the
screen or the buttons stay lit.
Display Tips: Select this option to turn on or off the built in Setup
Tips. Setup Tips are the programming manual for the
MX-450. They appear on the screen in context.
To Next Page
Loading...