Universal UCS Series - Page 16

Universal Chilling Systems, LLC.
16
Manual Model 10 Air Cooled Chiller
4. TEMP. SETTINGS 1
5. TEMP. SETTINGS 2
6. TEMP. SETTINGS 3
7. TEMP REVISE
8. INPUT SET 1
9. INPUT SET 2
10. SENSOR SET
II. MODIFY PWD
Select MODIFY PWD by and , press OK to enter MODIFY PWD as below:
All keys on the panel can be taken for password except OK and RETURN.
A. When enter by the manufacturer's password , only the manufacturer 's password can be
modified, show is below. First new password show:
INPUT5-6BIT PWD
******
The manufacturer's password must be 5-6 Bit; after the new password is in, the show is below:
PASSWORD CHECK !
******
If the password is the same for both times, the show is below:
PASSWORD ACCEPT
PRESS ANY KEY !
If the check password is not the same as the new password, return to new password
(manufacturer's page).
B. When enter by the repairman's password, only the repairman's password can be modified ,
show is below:
First new password show:
INPUT1-4BIT PWD
****