LUBRICATION AND FUNCTION CHECK
Warning: Turn the slicer OFF and disconnect the power supply cord and close the fence all the
way before lubricating.
General lubrication should be performed in accordance with the lubrication instructions below.
During this lubrication sequence, be sure to check for free operation and movement of related parts
as well as for excessive wear and looseness of various parts. Be sure to check all handles and
knobs for tightness.
LUBRICATION INSTRUCTIONS
A= Clean and apply mineral oil weekly B=Apply Petro-Gel (4400408) often as
required to maintain a light film.
Page 13
FIGURE 8
FIGURE 9
To Next Page
Loading...
Need help?
General
