7510/7512
SLICE ADJUSTMENT ASSEMBLY
MODEL 7510 - 7512
FIGURE 7
ILLUS. NO.
PART NO. DESCRIPTION QTY.
1. 7510067 SCREW, SLICE CONTROL ATTACHMENT 2
2. 8512527 SCREW, SLICE CONTROL ATTACHMENT 1
3. 8512526 JIB 1
4. 8512525 WASHER, TOOTHED 2
5. 7510065 SCREW, JIB ATTACHMENT 2
6. 7512076 BOLT, TAPER SUPPORT (7512 ONLY) 1
7510076 BOLT, TAPER SUPPORT (7510 ONLY) 1
7. 8512839 NUT 2
8. 8512522 WASHER 1
9. 6509071 STUD, CRANK 1
10. 8512511 BLOCK, SLICE ADJUSTMENT MOVING 1
11. 8512512 SHAFT, SLICE CONTROL 1
12. 7510073 STUD, JIB ATTACHMENT 1
13. 8512326 STUD 1
14. 6509131 NUT 1
15. 7510061 SPRING 1
16. 8512518 SCREW, SPRING ATTACHMENT 1
17. 6509028 WASHER 2
18. 8512501 PIN, ECCENTRIC 1
19. 8512502 GEAR 1
20. 8512503 WASHER 1
21. 8512504 SCREW, GEAR ATTACHMENT 1
22. 8512510 SHAFT, GRADUATED KNOB 1
23. 6509086 WASHER, FLEXIBLE 1
24. 8512507 WORM GEAR 1
25. 8512506 BALL 1
26. 8512508 ROLL PIN 1
27. 8512505 BALL STUD 1
28. 8512529 SCREW, SLICE ADJUSTMENT STOP 1
29. 8512530 NUT 1
30. 7510060 SLICE CONTROL GUIDE UNIT 1
PAGE 19
To Next Page
Loading...
