Installing your new wireless
Unlimited Internet HDRNZ007 Modem
Step 1: Open your box and pull out your modem. Make sure you
have your username and password that we sent to you via email
handy as you will need this when you reach Step 16.
Step 2: Connect the power adapter to an unused socket on your
wall, with the other end going into the port on your modem labeled
‘Power’.
Step 3: Next take the BT to RJ11 cable and plug the BT end into
your phone jack and then plug the RJ11 end into the port labelled
“DSL” on your modem.
Modem Ports
Step 4: Power the modem on by pressing the power button, labeled
‘ON/OFF’ on the modem.
Note: The front of the modem will light up with the following lights: Power,
DSL, 2.4G, 5G.
To Next Page
Loading...
Need help?
General