EasyManua.ls Logo

Unold 58265 - Cooking with the Timer

Unold 58265
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
to indicate that the appliance is
connected to the power supply.
2. Place a suitable pot with food to
be cooked in the middle of the
burner.
3. Press the ON/OFF button. The dis-
play shows 00 00.
4. Press the FUNCTION button
within 5 seconds. If you wait lon-
ger, you will have to switch on the
appliance again with the ON/OFF
button.
5. You can control the appliance
either by the heating power or
the temperature. Press the FUNC-
TION button to switch between
the two modes. The power and
temperature setting can be chan-
ged at any time during cooking by
pressing the Plus or Minus button.
6. Heat control: Press the Function
button until the indicator lamps
“W” and “Cook” light up. The
fan starts turning at the same
time. The standard setting for the
left burner is 1,800 watts and for
right burner 1,600 watts. You can
change these settings with the
Plus and Minus buttons. The fol-
lowing power levels are available:
Application
Left Right
400 W 400 W Keep
warm,
steep
800 W 800 W Cook gent-
ly
Application
Left Right
1.000 W 1.000 W Brown
gently and
fry
1.200 W 1.200 W Brown
gently and
fry
1.400 W 1.400 W Brown / fry
1.600 W 1.600 W Brown
quickly
1.800 W Grill
7. Temperature control: Press the
Function button until the indica-
tor lamps “C” and “Keep warm”
light up. The fan starts turning
at the same time. The standard
setting for both burners is 240°C.
You can change this setting with
the Plus and Minus buttons. The
following temperature levels are
available:
Level 1 60 °C Keep warm
Level 2 100 °C Cook gently
Level 3 140 °C Fry gently
Level 4 180 °C Fry / brown
Level 5 220 °C Grill
Level 6 240 °C Grill
8. If there is no pot on the burner,
a signal tone sounds at intervals,
the display shows E 0 and the
appliance automatically switches
off after 60 seconds.
COOKING WITH THE TIMER
This function makes it possible to program the appliance so that it automatically
switches off after a specified time.
1. First, select the desired function
as described above (Heat or Tem-
perature).
2. Press the “Time” button once. The
display shows “00:00”.
3. Now press the Plus or Minus but-
ton within five seconds to enter
the desired time. The maximum
number of hours that can be set
is 23 hours. Enter the minutes
following the same procedure. The
maximum number of minutes that
can be set is 59 minutes.

Table of Contents