23
Common Troubleshooting:
No SD card?
Camera needs SD card to work. If power supply is ok, try to fill or replace
with a good SD card
Can’t receive WiFi signal?
Check if the battery status is ok. If it’s ok, check camera NET setting (Send
Mode= OFF means WiFi will shut down), turn Send Mode to ON, try search WiFi
again. If it doesn’t work, try to move closer to WiFi router.
Can’t send photo or video?
Check whether your WiFi router is working, remember to register your
camera to cloud server
Send photo in video mode?
When the battery is too low to capture video, camera will automatically
capture photo rather than video, replace the batteries before it dries