UPPAbaby 56 - Install Front Wheels; Attach Seat

english
UPPAbaby 2010 VISTA Instruction Manual
5
Step 2 cont’d. Step 3 : Attach the seat
2b) To insert the front wheels: slide each
front wheel into the shaft until it locks.
To remove the front wheels: turn the
plastic knob in the direction shown
and slide wheel off.
3a) To attach seat: lower the seat onto the
frame and press down until it clicks into
place. Pull up on seat to be sure it is
locked to the frame.
3b) To remove seat: (arrow 1) push down
both security buttons and (arrow 2) lift
the seat from the frame.
NOTE: Seat can attach in either forward or
rear-facing directions.
CLICK
1
2
2
1
CLICK
1
2
2
1
CLICK
1
2
2
1
CLICK
1
2
2
1
CLICK
1
2
2
1
CLICK
1
2
2
1