6
7
BASSINET OPERATION
To Attach Bassinet to Stroller Frame: Guide the
bassinet hubs over the posts on the stroller frame.
Push until you hear a “click” on both sides.
NOTE: Check that safety indicator is green to ensure
bassinet is properly installed.
To Remove Bassinet from Stroller Frame: Slide plastic
button on carry handle in the direction indicated
and press down to release bassinet. Lift bassinet off
frame using carry handle.
ATTACHING BASSINET TO STROLLER FRAME
CANOPY VENTILATION
STEP 2: Lift and line up seam
half-way until magnets connect.
STEP 1: Unzip the bottom zipper
on the canopy hood.
For Additional Ventilation: Undo
Velcro flap found on bottom exterior
of bassinet and adhere to lower
Velcro strip.
STEP 1: Collapse bassinet canopy by simultaneously
pressing buttons on both sides and pushing back.
STEP 2: Lift mattress out of the way. Disengage by
pulling steel braces from their respective sockets.
COLLAPSING BASSINET
BASSINET ASSEMBLY
STEP 1: Remove mattress.
STEP 3: Pull bassinet canopy handle upright until an
audible “click” is heard.
STEP 2: Pull both steel braces firmly towards the outer
ends of the bassinet into their respective sockets.
Make sure both braces are properly locked in place.
STEP 4: Zip bassinet cover onto bassinet frame.
SETTING UP THE BASSINET
0917-BAS-USCA_BassinetInstructions_V1.indd 6-7 10/4/16 3:32 PM
To Next Page
Loading...
