Need help?Do you have a question about the UPPAbaby mesa and is the answer not in the manual?
General| Product Type | Infant Car Seat |
|---|---|
| Car Seat Weight Without Base | 9.9 lbs |
| Child Maximum Height | 32 inches |
| Installation | LATCH or seat belt |
| Harness Type | 5-point |
| Safety Standards | FMVSS 213 |
| Compatibility | Compatible with UPPAbaby strollers |
Confirms the child restraint system meets Federal Motor Vehicle Safety Standards.
Guidance on rear-facing duration and weight/height requirements for children.
Instructions for registering the child restraint for recall notifications.
Information on the child restraint's expiration date and when to discontinue use.
Critical safety warnings and general guidelines for safe use and installation.
Identification of components and features on the MESA car seat base.
Identification of components and features on the MESA infant car seat carrier.
Guidance on selecting the safest and best seating position in a vehicle.
Procedure to determine the optimal installation method using vehicle manual.
Overview of methods for installing the car seat base in a vehicle.
Instructions for installing the carrier directly into the vehicle without the base.
Explanation of the LATCH system (Lower Anchors and Tethers for CHildren).
Information on vehicle seat belt types compatible with the car seat.
Identifies vehicle seat belt systems and seating positions that are unsafe.
Steps to ensure the car seat base is correctly leveled using the adjustment foot.
Step-by-step guide for installing the base using vehicle lower anchors.
Procedures to verify the secure and correct installation of the base.
Instructions for safely removing the car seat base from the vehicle.
Steps to ensure the car seat base is correctly leveled using the adjustment foot.
Overview of securing the base using the vehicle's seat belt system.
Detailed steps for base installation using lap and shoulder belts.
Detailed steps for base installation using lap belt only.
Procedures to verify the secure and correct installation of the base.
Instructions for safely removing the car seat base from the vehicle.
Steps to ensure the carrier is correctly leveled on the vehicle seat.
Guidance on choosing the best seat belt installation method for the carrier.
Procedure for installing the carrier using the standard lap/shoulder belt routing.
Instructions on using a locking clip for seat belt installation.
Procedure for installing the carrier using only the lap belt.
Guidance on correct positioning of the harness buckle and straps for the child.
Information on using the infant insert for smaller babies (4-8 lbs).
Proper positioning of head restraint and harness for child safety.
Step-by-step instructions for properly securing a child in the car seat.
How to perform the pinch test to ensure the harness is snug.
Procedure for securely attaching the carrier to the car seat base.
Instructions for safely detaching the carrier from the car seat base.
How to extend, retract, and stow the carrier's canopy.
Information on using and adjusting the carrier's carry handle.
Summary of crucial checks to ensure child restraint safety and proper use.
How to attach the MESA carrier to compatible stroller frames.
How to detach the MESA carrier from stroller frames.
Instructions for attaching adapters to specific stroller models.
How to attach the carrier to strollers using specific adapters.
How to detach the carrier from strollers using specific adapters.
Instructions for removing Side Impact Protection (SIP) padding for cleaning.
Detailed steps for removing the seat padding for cleaning or washing.
Detailed steps for reinstalling the seat padding after cleaning.
Instructions for reinstalling the Side Impact Protection (SIP) padding.
Guidelines for cleaning fabrics, harness, canopy, and plastic components.
Contact information and resources for UPPAbaby customer support and warranty inquiries.
To Next Page
