UPPAbaby mesa - Securing the Base (Lap and Shoulder Belt Installation)

42 43
UPPAbaby MESA Instruction Book UPPAbaby MESA Instruction Book
SEAT PADDING REMOVAL
STEP 1: Remove buckle cover.
STEP 2: Unhook harness adjuster
strap from underside of carrier.
STEP 3: Remove (4) plastic tabs
from front sides of carrier.
STEP 4: Loosen padding from front
end of carrier and free padding
from around harness adjuster
release button housing.
STEP 5: Raise SIP to highest position
and pull back padding panel.
1 2
4
5
3
CARE + MAINTENANCE
SEAT PADDING REMOVAL
STEP 6: Slide SIP to lowest
position and release (6) plastic
tabs from upper portion of carrier.
STEP 7: Thread SIP adjuster tab
through buttonhole in top of
seat pad.
STEP 8: Pull seat padding up and
forward to remove padding around SIP.
6 7
8
CARE + MAINTENANCE
0225_MESA_INS_V4.indd 42-43 3/19/15 11:07 AM