44 45
UPPAbaby MESA Instruction Book UPPAbaby MESA Instruction Book
SEAT PADDING INSTALLATION
STEP 1: With the SIP in the lowest position install seat padding behind SIP.
STEP 2: Thread SIP adjuster tab through buttonhole located on top of
seat padding.
STEP 3: Insert the (6) upper plastic tabs into slots in carrier.
STEP 4: Feed buckle through buttonhole in seat padding.
STEP 5: Install buckle cover tucking tabs through buttonhole.
STEP 6: Raise the SIP and place buckle in harness holder pockets.
1 2
43
65
CARE + MAINTENANCE
CARE + MAINTENANCE
SEAT PADDING INSTALLATION
STEP 7: Lift lower part of SIP and secure padding panel.
STEP 8: Pull harness adjuster strap through opening in seat pad and install
pad around harness adjuster release button housing.
STEP 9: Wrap padding around front lip and install (4) plastic tabs.
STEP 10: Reconnect harness adjuster strap.
7 8
9
10
0225_MESA_INS_V4.indd 44-45 3/19/15 11:07 AM
To Next Page
Loading...
