UPPAbaby mesa User Manual

TABLE OF CONTENTS
BEFORE YOU BEGIN 3
CERTIFICATION 3
USE RECOMMENDATIONS 3
REGISTRATION 4
NOTICE OF EXPIRATION 4
WARNINGS + GENERAL SAFETY INSTRUCTIONS 5
VEHICLE COMPATIBILITY 14
CHOOSING A VEHICLE SEATING LOCATION 14
DETERMINING BEST INSTALLATION METHOD 15
BASE INSTALLATION 15
CARRIER INSTALLATION WITHOUT BASE 15
OVERVIEW OF LATCH 16
OVERVIEW OF VEHICLE SEAT BELT SYSTEMS 17
UNSAFE VEHICLE SEAT BELT SYSTEMS + SEATING 18
BASE INSTALLATION WITH LOWER ANCHORS 19
LEVELING BASE 19
BASE INSTALLATION WITH LOWER ANCHORS 20
SAFETY CHECK 21
UNINSTALLING BASE 21
BASE INSTALLATION WITH VEHICLE SEAT BELT 22
LEVELING BASE 22
SECURING THE BASE WITH VEHICLE SEAT BELT 22
SECURING THE BASE (LAP AND SHOULDER BELT INSTALLATION) 23
SECURING THE BASE (LAP BELT ONLY INSTALLATION) 24
SAFETY CHECK 25
UNINSTALLING BASE 25
REAR-FACING SEAT FEATURES 10
OVERVIEW OF BASE 10
OVERVIEW OF CARRIER 12
Read all instructions before use of the rear-facing car seat.
Keep instruction book for future use.
(Storage pocket located on underside of base.)
0225_MESA_INS_V4.indd 1-1 3/19/15 11:07 AM

UPPAbaby mesa Specifications

General

Product Type	Infant Car Seat
Car Seat Weight Without Base	9.9 lbs
Child Maximum Height	32 inches
Installation	LATCH or seat belt
Harness Type	5-point
Safety Standards	FMVSS 213
Compatibility	Compatible with UPPAbaby strollers