EasyManuals Logo

UPPAbaby mesa User Manual

UPPAbaby mesa
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
18 19
UPPAbaby MESA Instruction Book UPPAbaby MESA Instruction Book
STEP 1: Place the base on the vehicle seat with the adjustment
foot toward the vehicle seat back.
STEP 2: Press the level adjust button on the top of the base
to extend the foot and change the recline angle. Check the
angle indicators on either side of the base. The base is level
when only the green marker is visible between the two arrows.
No red should be visible.
NOTE: Vehicle must be parked on a level surface to properly
level the base.
NOTE: If proper angle cannot be
achieved with adjustable foot, pool
noodles or a rolled towel may be used.
LEVELING BASE
LEVEL WHEN
NO RED
VISIBLE
LEVEL WHEN
NO RED
VISIBLE
LEVEL WHEN
NO RED
VISIBLE
LEVEL WHEN
NO RED
VISIBLE
1 2
UNSAFE VEHICLE SEAT BELT SYSTEMS + SEATING
WARNING
DEATH OR SERIOUS INJURY CAN OCCUR
Lap belts with emergency
locking retractor
Motorized (automatic) Lap/Shoulder with
two retractors
Inflatable
Vehicle seats that face
side of the vehicle
Door mounted
Vehicle seats that face rear of the vehicle
DO NOT use this child restraint with the following vehicle seats:
X XX
X X
BASE INSTALLATION WITH LOWER ANCHORS
CHECK YOUR VEHICLE INSTRUCTION BOOK
for information regarding your vehicle seat belt system(s).
Not all vehicle seat belts work with this child restraint.
DO NOT use this child restraint with the following seat belt systems:
VEHICLE COMPATIBILITY
0225_MESA_INS_V4.indd 18-19 3/19/15 11:07 AM

Table of Contents

Other manuals for UPPAbaby mesa

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the UPPAbaby mesa and is the answer not in the manual?

UPPAbaby mesa Specifications

General IconGeneral
Product TypeInfant Car Seat
Car Seat Weight Without Base9.9 lbs
Child Maximum Height32 inches
InstallationLATCH or seat belt
Harness Type5-point
Safety StandardsFMVSS 213
CompatibilityCompatible with UPPAbaby strollers

Related product manuals