6
7
CARRYCOT ASSEMBLY
STEP 1: Remove mattress.
STEP 3: Pull carrycot canopy handle upright until an
audible “click” is heard.
STEP 2: Pull both steel braces firmly towards the outer
ends of the carrycot into their respective sockets.
Make sure both braces are properly locked in place.
STEP 4: Zip carrycot cover onto carrycot frame.
SETTING UP THE CARRYCOT
CARRYCOT OPERATION
To Attach Carrycot to Pushchair Frame: Guide the
carrycot hubs over the posts on the pushchair frame.
Push until you hear a “click” on both sides.
NOTE: Check that safety indicator is green to ensure
carrycot is properly installed.
To Remove Carrycot from Pushchair Frame: Slide
plastic button on carry handle in the direction indicated
and press down to release carrycot. Lift carrycot off
frame using carry handle.
ATTACHING CARRYCOT TO PUSHCHAIR FRAME
CANOPY VENTILATION
STEP 2: Lift and line up seam
half-way until magnets connect.
STEP 1: Unzip the bottom zipper
on the canopy hood.
For Additional Ventilation: Undo
Velcro flap found on bottom
exterior of carrycot and adhere to
lower Velcro strip.
STEP 1: Collapse carrycot canopy by simultaneously
pressing buttons on both sides and pushing back.
STEP 2: Lift mattress out of the way. Disengage by
pulling steel braces from their respective sockets.
COLLAPSING CARRYCOT
0223_VISTA_BassinetInstructions_V1 copy.indd 6-7 10/1/14 3:56 PM
To Next Page
Loading...
