1. First, place all parts to be used in the
process of installation in front of you.
2. Take the clamp and clasp the trampoline
pole into the smaller hole of the 8-Shaped
Pole Clamp. (serves as the pole and leg
connector),
3. Once the pole is securely inserted into the
clamp you can now clasp the leg into the
larger hole of the clamp. Making sure that
the black rubber cap of the lower pole
faces down.
4. Be aware that the mark on the lower pole
needs to align with the trampoline frame. If
there is no line on the pole then please
have it attached 18” below the frame.
6
2 adults in good physical condition are required for the following
assembly. Wear proper shoes and maintain balance to prevent a fall.
Failure to follow all instructions and warnings may result in serious
injury.
Warning :
Pole Installation Instructions
To Next Page
Loading...
