Upright UL25 User Manual

Operator Manual
Guide de l’opérateur
Betriebsanleitung
UL25, UL32 & UL40
SERIAL NO. 21373 to Current
WARNING
All personnel shall carefully read, understand and follow all safety rules,
operating instructions, and National Safety Instructions/Requirements
before operating or performing maintenance on any UpRight Aerial Work
Platform.
The first section of this Operator Manual is the English language version.
AVERTISSEMENT
Tout le personnel doit lire attentivement, bien comprendre et suivre toutes
les règles de sécurité, le mode d’emploi et les règles nationales de
sécurité avant d’entretenir ou d’utiliser une plate-forme élévatrice
UpRight.
La deuxième section du guide de l’opérateur est la version française.
WARNUNG
Alle Bediener müssen die Sicherheitsregeln, Betriebsanleitungen sowie
geltenden Sicherheitsanweisungen/-anforderungen gründlich durchlesen,
verstehen und befolgen, bevor sie an irgendeiner UpRight-
Hocharbeitsbühne Wartungsarbeiten ausführen oder diese in Betrieb
nehmen.
Der dritte Abschnitt dieser Betriebsanleitung ist deutschsprachig.
P/N 068017-021

Upright UL25 Specifications

General

Brand	Upright
Model	UL25
Category	Lifting columns
Language	English

Summary

Operator Manual and Safety Warnings

Multilingual Safety Warnings

Key safety warnings and operating instructions presented in multiple languages.

Safety Rules and Hazard Identification

Hazard Identification

Visual identification of key hazards: Electrocution, Tip Over, Collision, and Fall.

General Safety Precautions

Special Limitations and Capacity

Operating Environment Limits

Platform Load and Force Limits

Daily Safety Inspection Checklist

System Functionality Tests

Operation Procedures

Elevating and Lowering the Platform

Instructions for safely raising and lowering the work platform.

Emergency Lowering Procedure

Steps for safely lowering the platform in an emergency situation.

Inspection and Maintenance Schedule

Daily Preventative Maintenance Checklist

A checklist for daily inspections to ensure proper machine service and maintenance.