10
Charging Step
Open the charging port cover, Make sure the charging port is clean and dry.
Connect the charger with the battery and the other end with power(100V-240V;50/60Hz),
make sure the charging indicator is on.
When the indicator light on the charger changes, indicating that the charging process is normal,
otherwise check if the line connection is good.
When the indicator on the charger has color change, it indicates that the battery has been filled
to 99%, Please stopcharging; long time over charge will affect the battery life.
Tips:
Remove the battery to open the silicone charging port, plug the charger DC plug into the battery
charging port. Plug the power cord into the charger, then connect the other port to the socket (100V-
240V; 50/60Hz) and confirm the charger indicator is on normally.Cover the charging port with the
anti-dust cap in case some metal may touch the charging port and bring
short-circuit after charging finished.
To Next Page
Loading...
Need help?
General
