URC Total Control SNP-2 User Manual

Page 7
SNP-2 STREAMING NETWORK PLAYER
Standalone Operation
The SNP-2 also functions without a Total Control system, by simply
adding a URC Complete Control RF base station and RF remote
control.
1. Plug the power cord into the rear of the SNP-2 and the other
end into a power outlet.
2. Plug the Ethernet RJ45 cable to the LAN port in the rear of
the SNP-2 and plug the other end into an available port of a
MFS-8 or router.
3. Connect an HDMI cable to the rear of the SNP-2 and an
HDMI TV.
4. Connect a URC RF base station to the IR input of the SNP-2.
5. Program a compatible one-way URC remote to communicate
with the RF base station. (Requires the URC Certified Custom
Professional to program the URC remote and base station.)
MX-780

URC Total Control SNP-2 Specifications

General

Brand	URC
Model	Total Control SNP-2
Category	Media Player
Language	English