Page 3
SNP-2 STREAMING NETWORK PLAYER
Front Panel Description
Power LED: Indicates the SNP-2 is connected to power.
Ethernet LED: Indicates the network connectivity status.
● ON = Connected
● OFF = Not Connected
● Blinking = Attempting to connect
Reset Button: The front panel reset button offers a quick way to
power cycle or reset the SNP-2 back to its factory state.
● Power Cycle: Press to turn the unit OFF then back ON
again while retaining your music account information.
(Ie. login and music libraries.)
● Factory State: Pressing and holding for 15 seconds will
revert the SNP-2 back to its factory state while also
removing your music account information. (Ie. login and
music libraries.)
Power
Ethernet
Reset
To Next Page
Loading...
Need help?
General