SNP-2 STREAMING NETWORK PLAYER
Page 22
Audio Setup
The SNP-2’s setup will determine whether or not the audio settings
can be modified. The audio options will NOT be available, if your
custom professional has integrated the SNP-2 with the Total Control
system and a DMS unit. However, the audio options will be
available, if the SNP-2 is setup as a standalone music source.
The SNP-2 default audio output is set to a bit rate of 16 bit/44.1K.
When ONLY S/PDIF or Analog Audio is ON, the audio output is
played at a bit rate of 24 bit/192K.
● Streaming Output
Turn the Streaming Output ON to stream music to DMS units
connected to the Total Control system. Turn Streaming Output
OFF to limit playback to analog and coaxial outputs only.
● Audio Fade
When Audio Fade is set to ON the music will fade out, then
in, when changing between music sources.
● HDMI Audio Output
Turn ON the HDMI Audio Output to send digital audio to an
HDMI device like a television or an audio receiver.
● S/PDIF or Analog Audio Output
The S/PDIF Coaxial digital output or Analog Audio Output
option should be set based upon the audio connection used
for the SNP-2 (if any).
Select Go Back to return to the previous screen.
To Next Page
Loading...
Need help?
General