_ 19
07
Installation – ADAS cameras
Installation preparing & precautions
1.
#
For the ADAS, please install the main device to fit the top center(beneath of the room mirror) of the front glass (less
than 15cm).
2.
#
Product mounts can move about 3 degrees if users cannot install the products to the center, adjust its angles to the
center.
3.
#
If its any angles or the installed location has been changed, please set the [ADAS]-[camera installation] again.
4.
#
Please adjust LDW & FVSA time If they are too fast or slow.
5.
#
Lane departure warnings and forward collision alert notifications will work after the device is connected with GPS.
They also operate over the set speed.
6.
#
Even if you turn on the blinker, since The product does not link with the blinker, lane departure alarms will sound.
▪Youmustinstalltheunitinahighpositionofthewindshieldifyourvehiclebodyislower.
To Next Page
Loading...
