Urive MD-9400E - How to Upgrade

_ 41
10
Upgrade – Auto upgrade
[ How to upgrade automatically ]
1. # With the PC Viewer, you can automatically install the upgrade file in the memory card. Insert a micro SD card into a
PC, and then press button at the upper left of main screen of Viewer. (If a micro SD card having firmware version
information is inserted, a prompt of new firmware is shown as in
①
).
2. # Make sure you select correct drive letter of micro SD card; press the Update button.
3. # When the update is finished, a prompt pops up as in
④
and the update file (MD9400E.bin) is copied to the micro SD
card.
4. # After putting the Micro SD card to the main body; connect the power; and it starts auto upgrade. Then it reboots after
upgrading.
1 2 3 4