Need help?Do you have a question about the urmet domus 1061/004 and is the answer not in the manual?
General| Brand | urmet domus |
|---|---|
| Model | 1061/004 |
| Category | Control Panel |
| Language | English |
Explains the 1061 system's two versions (4/6 lines) and general features.
Illustrates the system's components and expansion modules with a diagram.
Lists and describes various components of the 1061 system, including control panels and accessories.
Provides essential notes for proper installation of the 1061 system, covering placement and network checks.
Details the calculation for determining the minimum battery capacity for system endurance.
Covers cable cross-section calculation for voltage drop and placement considerations.
Instructions for mounting and fixing the main control panel unit, including cable aperture opening.
Guides on how to add optional expansion modules to the control panel motherboard.
Explains connecting keypads, readers, and other bus devices to the control panel.
Details the connections on the control panel's motherboard, including terminals and connectors.
Details the terminal pins and connections for the keypad, including auxiliary and tamper inputs.
Details how to connect the control panel to the mains power supply and backup battery.
Outlines the general steps for programming the system via control panel or PC.
Describes the physical interface on the control panel for programming operations.
Explains the initial setup procedure after the first power-up, including master key acquisition.
Details the hardware-based programming menus for configuring inputs, outputs, and times.
Explains how to program the system using the PC-based EasyPro software.
Final steps for completing the installation of system components like readers and keypads.
Details how to perform a system test after installation to verify functionality.
General procedure for entering maintenance mode to work on system components safely.
Procedures for adding, deleting, or replacing electronic key and proximity readers.
Procedures for adding, deleting, or replacing keypads in the system.
Procedures for adding, deleting, or replacing detectors connected to the system.
Instructions on how to add optional devices to the control panel.
Step-by-step instructions for replacing the control panel's backup battery.
Guidelines for cleaning the system devices using a dry cloth.
Technical specifications for the 1061 control panel, including power, consumption, and dimensions.
Technical specifications for the management keypad, including working voltage and dimensions.
Technical specifications for the electronic key reader, including key code number and dimensions.
Technical specifications for the proximity reader, including key code number and reading distance.
Technical specifications for the PSTN telephone communicator module.
Technical specifications for the GSM module, including working voltage and power modes.
Technical specifications for the speech synthesis card module.
Technical specifications for the environmental listening and message repeater module.
To Next Page
