Need help?Do you have a question about the urmet domus 1061/006 and is the answer not in the manual?
General| Brand | urmet domus |
|---|---|
| Model | 1061/006 |
| Category | Control Panel |
| Language | English |
Details the PSTN communicator's functions and capabilities.
Describes the GSM module's functions, capabilities, and antenna.
Details the programming and remote assistance software for PC.
Provides crucial notes for correct installation, including GSM signal and device placement.
Details how to calculate cable cross-section based on voltage drop and current.
Details the control panel's physical installation and mounting procedures.
Details the procedure for opening the control panel and its lid.
Explains how to fix the control panel to the wall, including tamper adjustment.
Provides step-by-step instructions for adding the PSTN telephone communicator.
Details the procedure for adding the GSM module and mounting its antenna.
Covers screwing the GSM antenna connector and SIM card insertion.
Details mounting options and tamper protection for readers.
Explains mounting options and screw types for the management keypad.
Details keypad tamper protection and wall mounting box installation.
Explains connecting devices (keypads, readers) to the control panel via a 4-wire bus.
Details the terminal pins and connectors on the control panel motherboard.
Lists and describes the function of motherboard jumpers and terminal pins.
Explains connecting various detectors to inputs and input configuration notes.
Details the connections for mains power supply and backup battery.
Outlines the sequential steps for system programming.
Guides through the initial power-up and master key/code acquisition.
Introduces the hardware configuration section.
Outlines the menu for configuring PSTN and GSM communicator settings.
Details telephone number entry, checking, deleting, and GSM field tests.
Introduces the software configuration section.
Explains how to configure inputs, outputs, and times using the software.
Details configuration of codes and keys using the software interface.
Details configuring PSTN and GSM communicators via software, including phone options.
Covers phone number configuration, call types, and alarm event associations.
Lists essential checks for keys, codes, sensors, outputs, and communicators.
To Next Page
