Need help?Do you have a question about the urmet domus 1061/006A and is the answer not in the manual?
General| Brand | urmet domus |
|---|---|
| Model | 1061/006A |
| Category | Control Panel |
| Language | English |
Describes the overall system architecture, including inputs, outputs, and zones.
Details the system's core functions and available expansion modules.
Lists and describes all components that make up the 1061 system.
Features and performance specifications of the central 1061/006A control panel.
Details the management keypad functions, connectivity, and anti-theft activation.
Explains the electronic key reader's function and connection to the control panel.
Describes the proximity reader's function and connection with transponder keys.
Details the programmable electronic key for use with the electronic key reader.
Details the programmable transponder key for use with the proximity reader.
Explains the PSTN communicator's capabilities for alarm reporting and remote management.
Details the GSM module's functions for alarm messages, SMS, and remote checks.
Describes the speech synthesis board for alarm message recording.
Explains the module for environmental listening and local message playback.
Details the USB interface for PC connection and panel programming.
Covers the software for programming and remote assistance via PC.
Lists adapters for integrating readers with common residential series boxes.
Provides essential notes for the correct placement and installation of the control panel.
Guidance on selecting the appropriate battery size for system autonomy.
Explains how to calculate the total system power absorption for planning.
Details on calculating cable cross-section and proper cable routing.
Formula and guidelines for calculating the correct cable cross-section based on load.
Specifications for the data bus cable, including type and maximum length.
Requirements for the audio line cable, including type and maximum length.
Rules for routing alarm cables separately from mains power cables.
Instructions for installing the main control panel unit.
Procedures for opening and physically mounting the control panel.
Details on pre-fractured apertures for cable entry and battery mounting.
Guidance on selecting a suitable location and fixing the control panel to the wall.
Instructions for adding optional expansion modules to the control panel.
Step-by-step guide to safely remove the control panel motherboard.
Identifies the expansion connectors on the motherboard and their uses.
Detailed steps for connecting the PSTN telephone communicator module.
Step-by-step instructions for installing the GSM module and its antenna.
Instructions for connecting the speech synthesis board and audio lines.
Configuration and installation of electronic key and proximity readers.
Details on mounting and installing the management keypad.
Procedure for configuring the rotary switch address for keypads.
Details on ensuring tamper protection for the keypad installation.
Instructions for mounting the keypad in its provided wall mounting box.
How to connect bus devices like readers and keypads to the control panel.
Details on the control panel's internal components and connections.
Diagram and description of the control panel motherboard and its connectors.
Detailed list and explanation of all terminal pin functions on the control panel.
How to connect and configure system inputs, including NC and balanced lines.
Instructions for connecting internal and self-powered sirens and relay outputs.
Guide to selecting the control panel operating mode using jumper JP4.
Terminal pinout and connection details for the keypad.
Configuration of the keypad's auxiliary input for contacts or detectors.
Connection diagram for the keypad's tamper input.
Instructions for connecting the system to mains power and backup battery.
Step-by-step guide to programming the system's various parameters.
Description of the programming interface elements on the control panel.
Initial setup steps after the first power-up of the control panel.
Methods for configuring the system using the control panel hardware.
Procedure to enter the control panel's programming mode.
Overview of the main menu structure for hardware configuration.
Detailed menu for configuring each input's type and behavior.
Menu for configuring programmable relay outputs and their associations.
Procedure for associating inputs with specific system zones.
Settings for various system timing parameters like entry, exit, and alarm durations.
Procedure for acquiring and deleting electronic or transponder keys.
Steps for acquiring, deleting, and managing user and master codes.
Associating acquired keys with specific system zones.
Associating programmed codes with specific system zones.
Menu for configuring PSTN and GSM communicator parameters and events.
Instructions for entering and storing telephone numbers for alarm calls.
Procedure for deleting stored telephone numbers.
Guide to recording and playing custom vocal messages for alarms.
Step-by-step guide to recording custom vocal messages.
Instructions for playing back recorded vocal messages.
Configuring keypad auxiliary inputs for contacts or rolling shutters.
How to safely exit the programming mode and save settings.
Using PC software for advanced system configuration and customization.
Steps to connect the PC to the control panel via USB for software configuration.
Configuring inputs, outputs, and times using the EasyPro software interface.
Software interface for configuring keypad codes and electronic/transponder keys.
Locally programming PSTN and GSM communicator parameters via software.
Final steps for closing components and securing the system.
Instructions for installing and closing readers into their supports.
Procedure for mounting and closing keypads, ensuring tamper closure.
Steps to close the control panel lid and exit maintenance mode.
Performing system tests to verify functionality after installation.
Entering maintenance mode to service components without triggering alarms.
Procedures for adding, deleting, or replacing electronic/proximity readers.
Procedures for adding, deleting, or replacing keypads in the system.
Instructions for adding, deleting, or replacing detectors connected to inputs.
Steps for adding any optional device to the control panel.
Guide to safely replace the control panel's backup battery.
Simple instructions for cleaning the system devices.
Comprehensive technical specifications for the 1061/006A control panel.
Technical specifications for the management keypad.
Technical specifications for the electronic key reader.
Technical specifications for the proximity reader.
Technical specifications for the PSTN telephone communicator.
Technical specifications for the GSM module.
Technical specifications for the speech synthesis board.
Technical specifications for the environmental listening module.
Wiring diagram illustrating connection of devices using NC lines.
List of default parameters for the control panel unit.
List of default parameters for telephone communicators.
To Next Page
