Need help?Do you have a question about the urmet domus 1072/17 and is the answer not in the manual?
General| Brand | urmet domus |
|---|---|
| Model | 1072/17 |
| Category | Control Unit |
| Language | English |
Describes the Sinthesi S2 module's display, speaker, and buttons.
Enables direct calls via numeric code, name selection, and concierge.
Covers name/code management, generic codes, and programming methods.
Details programmable times for hang-up, conversation, and door lock activation.
Details the physical components, connectors, and controls of the call module.
Details the L1, L2, GND, PA, SP terminals on the MP2 board.
Details the SN, R, R1 terminals on the MV1 board.
Details terminals H, P, GND, +EP, DT, CNA, CNP, CNS on the MS1 board.
Specifies power requirements and consumption levels.
Details R signal, lock hold current, and operating temperature.
Provides humidity specifications for operation.
Instructions for connecting door sensors and electrical locks, including polarized locks.
Outlines three methods for programming the module: external keyboard, local keypad, or PC.
Explains automatic entry and exit from programming mode via the external keyboard.
Details accessing programming with known or unknown passwords.
Compares programming functions between local keypad and external keyboard.
Configures module edition type and display language.
Sets the module as a main or secondary station.
Configures station ID, off-hook stand-by, and busy times.
Sets door lock activation time and generic door opener codes.
Procedure for entering the 4-digit door opener codes.
Defines code type and allows programming of user names and codes.
Functions for entering and editing user data and codes.
Edit user data by searching by position or name.
Clears all data and details the door phone booking/programming sequence.
Manage programming password and enable switchboard calls.
Restores default settings and explains PC-based programming.
Procedures for downloading and uploading data between PC and module.
Adjusts display contrast and introduces user calling methods.
Step-by-step guide for calling users by name or code.
Direct call to concierge and using door opener codes.
Details generic and personal door opener code usage.
Explains the busy function and its time parameters.
To Next Page
