Do you have a question about the urmet domus 1133/15 and is the answer not in the manual?
Brand | urmet domus |
---|---|
Model | 1133/15 |
Category | Intercom System |
Language | English |
Compatibility with 4+n (5 wires) and 1+n (2 wires) systems with any push button panel.
Choice between traditional buzzer call or electronic call via handset loudspeaker.
Adjustment or disabling of electronic call using a three-position switch.
Adjusting the volume of incoming speech via the handset loudspeaker.
Adjusting the volume of outgoing speech via the handset microphone.
Identify apartment station code and system type by number of connected wires.
Before disconnecting, note wire colors and terminal pin numbers for reconnection.
Verify if the unit has a buzzer ringer (12 Vac) or electronic loudspeaker ringer.
The 1133/15 is not compatible with Urmet Domus concierge switchboards Mod. 605.
Manufacturer is not responsible for malfunctions with non-Urmet Domus external units.
Wiring specifications for 4+n systems (5 wires audio).
Description of terminals based on system type (4+n and 1+n).
Set jumpers for 4+n systems, including default settings for call type and audio.
Set jumpers for 1+n systems, including default settings for call type and audio.
Configure the jumper JPA for buzzer call (default setting).
Configure the jumper JPA for electronic call via handset loudspeaker.
Test ringing, communication, and door opening from the push button panel.
Adjust the electronic ringer volume using the 3-position switch.
Adjust conversation audio level using MIC and SPK potentiometers.
Troubleshooting steps for a non-functional ringer.
Troubleshooting steps for Larsen or whistle sounds.
Troubleshooting steps for failure to open the door.
General troubleshooting advice for other issues.
Description of terminals for 4+n and 1+n systems.
Reconnect wires using the equivalence table and noted information.
Wiring details for 4+n systems, specifying terminal functions.
Wiring details for 1+n systems, specifying terminal functions.