Do you have a question about the urmet domus Alpha 1168 and is the answer not in the manual?
power voltage | 12 V ±10% |
---|---|
maximum draw | 260 mA @ 12 V |
maximum stand-by consumption | 105 mA @ 12 V |
maximum switchable relay load | 12 V / 24 V 5 A |
width | 120 mm |
---|---|
height | 90 mm |
depth | 25 mm |
Displays the homepage screen of the display module. Press a button to view the homepage if screensaver is active.
Describes how to make a call by selecting a name from the address book, with details on scrolling and selection.
Explains making calls via numerical, logical, topological, or block codes, including error correction and busy/no answer scenarios.
Instructions on how to call the switchboard to connect with an operator, managing conversations and busy conditions.
Details on opening doors or gates using door codes or transponder keys, including confirmation steps.
Procedure for sending special codes, involving entering an activation code and confirming it via the interface.
Guidance on cleaning the device front panels using a soft damp cloth, advising against alcohol-based cleaning products.
Provides power voltage details and explains symbols used in the manual, referencing the installation manual for more info.
Instructions to configure the device, directing users to the technical system manual on the URMET website for details.
Information on how to access the full manual via QR code, offering comprehensive usage details for Ipercom systems.
Lists simplified EU declarations of conformity for various module titles, referencing the URMET website for full text.
Explains the WEEE directive concerning waste electrical and electronic equipment disposal and recycling responsibilities.