Need help?Do you have a question about the urmet domus H.265 NVR and is the answer not in the manual?
General| Video Compression | H.265 |
|---|---|
| Channels | 4/8 |
| Storage Type | HDD |
| Network Interface | RJ45 10/100 Mbps |
| Power Supply | DC 12V |
Information on power supply requirements and essential safety precautions for device operation.
Guidelines for safe and optimal placement to prevent overheating and ensure proper functioning.
Procedures for cleaning the device and important information regarding hard disk sensitivity.
Guidance on updating software/firmware and configuring network settings.
Identification and description of ports on the NVR rear panel for connectivity.
Step-by-step guide for connecting the NVR, its peripherals, and specific PoE series setup.
Initial configuration of language, administrator credentials, and unlock pattern for secure access.
Configuring device settings, viewing network parameters, and setting up static IP addresses for cameras.
Process for searching, adding, and assigning IP cameras to NVR channels.
Understanding automatic recording, live stream display, and troubleshooting resource limitations.
Setting up remote viewing via smartphone app or PC, and configuring NVR channels from a PC.
Configuring recording schedules, modes (Normal/Alarm), and stream types (Mainstream/DualStream).
Details on Mainstream, Substream, Mobile streams, and how to configure their parameters.
Checking recording status and understanding the importance of default streaming parameters.
How to access playback mode and use controls like fast forward, slow play, and rewind.
Downloading the URMET iUVS Plus app and setting up P2P connection with the NVR.
Using QR code scanning to obtain the NVR's Device ID for smartphone configuration.
Completing the smartphone connection by entering the NVR password and saving.
Using Urmet DDNS or LAN IP address for remote smartphone viewing.
Prerequisites for PC/MAC browser access, including OS and browser versions.
Installing and using the Device Config Tool to detect, configure, and access the NVR via browser.
Accessing the NVR directly via browser by entering its IP address and logging in.
Connecting to multiple NVRs simultaneously using the URMET UVS client software.
Details on installing the UVS client software and referring to its manual.
Downloading updated guides, manuals, software, and firmware from Urmet website via QR codes.
To Next Page