USB 7124 - 7125 - 7126
Professional Power Amplifiers
POWER SPECIFICATIONS 7124 7125 7126
STEREO (4 Ohms) 2x150W 2x300W 2x450W
STEREO (8 Ohms) 2x100W 2x200W 2x300W
BRIDGE-MONO (8 Ohms) 300W 600W 900W
I
NPUT SENSITIVITY 1.228V
INPUT IMPENDANCE 10 K Ohms unbalanced
FREQUENCY RESPONSE 10 Hz – 20 KHz
(at 1 Odb below rated output power)
DISTORTION (SMPTE-1 M) <0.5%
S/N RA
TIO 95 dB
PROTECTIONS: Full short circuit,thermal,Ultrasonic,
RF protection, signal muting & current limiter.
CONTROLS Front: Power switch,inputlevel control for
each channel.
INDICATORS Power – 1 x Blue LED
Signal – 2 x Green LED
Clip – 2 x Red LED
Protect – 2 x Red LED
CONNECTORS Power – IEC power cord
POWER SUPPLY Voltage selectable – 220 V AC – 50 Hz
FUSES T 2.5 A (USB 7124) T 4 A (USB 7125) T 8 A (USB 7126)
DIMENSIONS 482x229.5x88.8mm(USB 7124-7125)
482x389.5x88.8mm (USB 7126)
© US Blaster Europe BV
To Next Page
Loading...
