US Tower TMM-433SS - Equipment Specifications and Accessories; Tower Models and Specifications

FIXED LATTICE TOWER MANUAL
UNCONTROLLED
5
US Tower Corporation considers this manual and all of its contents to be Proprietary Information. Do not distribute or disclose it
or its contents to anyone without US Tower Corporation’s prior written approval.
ML 7.5.1-06 Rev D
1. Equipment Description/Specifications
US Tower’s line of quality telescoping towers offer multiple models and options providing maximum flexibility
for meeting your individual requirements. The TMM product line offers compact towers with a low retracted height.
The standard TX tower series provide strong economical towers wile the HDX heavy-duty series towers have up to 2
½ times more wind loading capacity than other commonly advertised units. A full line of accessories including our
commercial bases, anchor bolts, and raising fixtures are available to provide turnkey capability.
1.1 Tower Models (Information shown is approximate.)
1.1.1 TMM-433SS
Max Height 33’
Min. Nested Height 14’
Inside diam. 5 3/4”
Weight 315 lbs.
Number of Sections 4
Top Section Width 10”
Bottom Section Width 18”
Standard accessories: Hand winch, Hinged Base, Anchor Bolts, Rotor Plate, 2” O.D. 8’ mast.
* See Table 1 for optional accessories - See Table 2 for Compatible Rotors.
1.1.2 TMM-433HD
Max Height 33’
Min. Nested Height 14’
Inside diam. 6 1/2”
Weight 400 lbs.
Number of Sections 4
Top Section Width 12 ½”
Bottom Section Width 21 5/8”
Standard accessories: Hand winch, Hinged Base, Anchor Bolts, Rotor Plate, 2” O.D. 8’ mast.
* See Table 1 for optional accessories - See Table 2 for Compatible Rotors.
1.1.3 TMM-541SS
Max Height 41’
Min. Nested Height 15’
Inside diam. 5 3/4”
Weight 430 lbs.
Number of Sections 5
Top Section Width 10”
Bottom Section Width 21 5/8”
Standard accessories: Hand winch, Hinged Base, Anchor Bolts, Rotor Plate, 2” O.D. 8’ mast.
* See Table 1 for optional accessories - See Table 2 for Compatible Rotors.
1.1.4 TX-438
Max Height 38’
Min. Nested Height 22’
Inside diam. 6 1/2”
Weight 355 lbs.
Number of Sections 2
Top Section Width 12 1/2”
Bottom Section Width 15”
Standard accessories: Hand winch, Hinged Base, Anchor Bolts, Rotor Plate
* See Table 1 for optional accessories - See Table 2 for Compatible Rotors