US Tower TMM-433SS - Hdx572; Hdx589; Hdx689; Hdx5106

FIXED LATTICE TOWER MANUAL
UNCONTROLLED
7
US Tower Corporation considers this manual and all of its contents to be Proprietary Information. Do not distribute or disclose it
or its contents to anyone without US Tower Corporation’s prior written approval.
ML 7.5.1-06 Rev D
1.1.10 HDX-572
Max. Height 72’
Min. Nested Height 23’6”
Inside Diam. 8 ¼”
Weight 1420 lbs.
Number of Sections 4
Top Section Width 15”
Bottom Section Width 25 5/8”
Standard accessories: Hand winch, Hinged Base, Anchor Bolts, Rotor Plate
Suggested accessories: MDPL -1000 Motor Drive with either MCL-100 Limit Switch, Control or RMC-1000
Remote Control
* See Table 1 for optional accessories - See Table 2 for Compatible Rotors.
1.1.11 HDX-589MDPL
Max. Height 89’
Min. Nested Height 24’6”
Inside Diam. 8 ¼”
Weight 2440 lbs.
Number of Sections 5
Top Section Width 15”
Bottom Section Width 30 5/8”
Standard accessories: MDPL-1000 Motor Drive, MCL-100 Limit Switch Control, Hinged Base, Anchor Bolts,
Rotor Plate
* See Table 1 for optional accessories - See Table 2 for Compatible Rotors.
1.1.12 HDX-689MDPL
Max. Height 89’
Min. Nested Height 24’6”
Inside Diam. 8 5/8”
Weight 3400 lbs.
Number of Sections 5
Top Section Width 18”
Bottom Section Width 37 1/8”
Standard accessories: MDPL-1000 Motor Drive, MCL-100 Limit Switch Control, Hinged, Base, Anchor Bolts,
Rotor Plate
* See Table 1 for optional accessories - See Table 2 for Compatible Rotors.
1.1.13 HDX-5106MDPL
Max. Height 106’
Min. Nested Height 25’6”
Inside Diam. 8 ¼”
Weight 3805 lbs.
Number of Sections 6
Top Section Width 15”
Bottom Section Width 37 1/8”
Standard accessories: MDPL-1000 Motor Drive, MCL-100 Limit Switch Control, Hinged, Base, Anchor Bolts,
Rotor Plate
* See Table 1 for optional accessories - See Table 2 for Compatible Rotors.
**See Tower Structural Calculations for all Design Parameters & Wind Load Ratings.**