To Next PageTo Next Page
Need help?Do you have a question about the USAG 942 PC3 and is the answer not in the manual?
General| Brand | USAG |
|---|---|
| Model | 942 PC3 |
| Category | Impact Driver |
| Language | English |
Ensure machine use complies with regulations, intended purposes, and is not used in explosive atmospheres.
Operate at 90 psig max air pressure with correct hoses, and use clean, dry, lubricated air for optimal performance.
Maintain awareness of surroundings, secure workpieces, keep clear of moving parts, and check inversion system.
Use impact-rated accessories, genuine parts, and ensure repairs are done by authorized personnel only.
Check for dangerous interactions, ensure trigger is free, and connect via quick disconnect with an air brake valve.
Anticipate changes, immobilize workpiece, release trigger on blockage, and disconnect from air supply.
Be aware of vibration risks, stop if discomfort occurs, seek medical advice, and use protective equipment.
Do not carry by hose, maintain balance, avoid overreaching, and do not use under influence of substances.
Use an air line lubricator (USAG N.580) and inject 1/2 to 1cm³ oil every eight hours if not used.
Check suitability of USAG sockets, flogging spanner accessories, safety devices, bush, pin, and drive square.
Details noise levels, vibration levels, air consumption, working pressure, weight, and dimensions.
The serial number, including the manufacturing year, is printed into the housing above the rating plate.
