Need help?Do you have a question about the usi 1800-2700 and is the answer not in the manual?
Essential safety guidelines for operating and handling the laminator.
Overview of USI roll laminator design, ease of use, and modular construction.
Guidance on selecting an appropriate and safe work area for the laminator.
Details on power source requirements and electrical specifications for USI laminators.
Step-by-step guide on how to safely unpack the laminator and its components.
Detailed instructions for loading and threading laminating film, including color-coded methods.
Procedure for adjusting the laminator's temperature and recommended heat ranges.
Step-by-step guide to correctly adjust film tension for optimal lamination.
Procedure for replacing film rolls while the laminator is still warm.
Instructions for cleaning adhesive build-up from the heat shoes.
Guide on cleaning adhesive build-up from the rubber laminating and pull rollers.
Guidance on lubricating the drive chain and roller bushings.
Step-by-step instructions for safely removing the upper heat shoe from the laminator.
Detailed steps for the removal of the laminator's rubber rollers.
Procedure for replacing the thermal cut-out component in the laminator.
Instructions for replacing the thermistor, recommended for service technicians.
Common issues encountered during lamination and their potential causes.
Specific troubleshooting steps for heat, roller, and drive system problems.
Electrical schematics illustrating wiring for the Digital ARL series.
List of part numbers and descriptions for various sections of the laminator.
Information on different types of laminating film and their properties.
Explanation of USI's color-coding system for simplifying film loading.
To Next Page
General
