Usl ECI-60 - Page 6

- 6 -
ECI Background:
The Electronic Cinema Interface (ECI) is designed to select a single input from a
variety of sources and then feed the selected source into a cinema processor. The
ECI provides inputs from 6 Channel Analog, 2 Channel Analog, 8 Channel Digital,
Toslink, and two SPDIF sources. The output is fed into the host cinema proces-
sor’s External Analog Input (6 Channels). A balanced 2 channel analog output of
AES channels 7 and 8 is provided.
Additionally, to synchronize the audio to the video source, each channel is capable
of up to 300ms delay. Input Delays – Each stage channel L, C, R, SW) is capable
of up to 200ms delay allowing for projector delay . Surround Delays - For the sur-
round channels (LS, RS), an additional delay of up to 100ms may be added to the
Input Delay. Delays can be configured for each type of input.
When a digital format is not selected an additional input allows a 6 channel analog
signal to bypass the ECI and be fed directly into the cinema processor’s External
Analog Input.
Input trim gains of up to 18dB may be added to the 2 and 6 Channel Analog Inputs.
There are no input trims on the digital inputs.
Output Trim attenuation of up to 20dB may be applied to each of the Digital
Modes.
Environmental Conditions:
Operating: 0 decrees C to 40 degrees C (32F to 104F)
Storage: 0 degrees C to 85 degreesC (32F to 185F)
Humidity: 20% to 80% relative, noncondensing.
Power Requirements:
100-240 VAC, 50-60 Hz, 300mA
Specifications:
One rack unit chassis.
Front Panel: 19 X 1.72 (431.8 X 43.688 mm)
Chassis: 17 X 1.67 X 7.5 (431.8 X 42.418 X 190.5 mm)
Weight: 6.35 lbs. (2.880 kg)
Shipping weight: 10 lbs. (4.536 kg)
Shipping Size: 24” x 17” x 6” (609.6 x 431.8 x 152.4 mm)