Need help?Do you have a question about the USR IOT USR-TCP232-410s and is the answer not in the manual?
General| Model | USR-TCP232-410s |
|---|---|
| Type | Media Converter |
| Interface | RS232/RS485/RS422 |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Connector | RJ45, Terminal Block |
| Serial Port | RS232/RS485/RS422 |
| Network Interface | Ethernet |
| Power Supply | 5V DC |
| Communication Protocol | TCP, UDP, HTTP |
| Flow Control | RTS/CTS |
| Operating Temperature | -40 ~ 85°C |
| Storage Temperature | -40 to +85 °C |
| Humidity | 5% ~ 95%RH |
Illustrates the typical connection setup for the USR-TCP232-410s device.
Details the physical dimensions and components of the USR-TCP232-410s.
Covers fundamental operational modes like static IP/DHCP and default settings.
Details the various socket modes supported, including TCP and UDP clients/servers.
Explains serial port parameters, VCOM application, and flow control.
Describes advanced features like identity packets, heartbeat, and Modbus gateway.
Guide to configuring the device using the dedicated setup software.
Instructions for configuring the device via its built-in web interface.
Details serial and network AT commands for device configuration.
To Next Page
