Need help?Do you have a question about the USR IOT USR-W630 and is the answer not in the manual?
General| Model | USR-W630 |
|---|---|
| Type | Media Converter |
| Operating Temperature | -40 to 70 °C |
| Ethernet | 10/100 Mbps |
| Interface | Ethernet, Fiber |
| Serial Port | RS232/RS485 |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5% to 95% (non-condensing) |
Describes how to connect the serial port and network port of the USR-W630 to a PC.
Details default parameters and steps for testing data transmission using TCP/IP.
Describes how to configure the USR-W630 to operate as a Wi-Fi Access Point.
Explains how to configure the USR-W630 to connect to an existing Wi-Fi Access Point as a station.
Details how to configure the USR-W630 to operate simultaneously as an AP and a STA.
Lists the different operating modes of the USR-W630, including Transparent, Command, and AT modes.
To Next Page
