USR-W630 User Manual Technical Support: h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
Set W630 work at AP mode. Other W630s and computers can be connected to the W630 as STA, and it can also be
connected to user equipment through RS232/RS485 interface.
Figure 7 work as an AP
Set W630 work at STA mode and connect to other AP. The communication between STA is accomplished by AP
forwarding.
Figure 8 work as STA
USR-W630 can support one AP interface and one STA interface simultaneously. After opening the AP+STA function,
the STA and AP interfaces are available at the same time. The STA interface of the serial server is connected to the
router and is connected to the server in the network through TCPB, and the AP interface can be connected by mobile
phone / PAD (through TCPA). The TCP Server, mobile phone / PAD and so on in the network can control the serial port
devices connected by USR-W630 or set the parameters of serial port server itself.
To Next Page
Loading...
Need help?
General
