EasyManuals Logo

USR IOT USR-W630 User Manual

USR IOT USR-W630
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
USR-W630 User Manual Technical Support: h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
27
Figure 24 firmware upgrade
And waiting upgrade about 40s,don
t cut off the power.
5. Setting Method
W630 supports AT commands and webpage setting.
W630 and PC should join the same WIFI, or set the PC join the WIFI of W630.
5.1. Webpage Setting
W630 default AP mode.
Table 7 webpage default parameters
Parameter
Default
SSID
USR-W630_XXXX
IP
10.10.100.254
Subnet mask
255.255.255.0
Account
admin
Password
admin
5.1.1. Open The Webpage
Make PC join the WIFI of W630, enter 10.10.100.254, the account and password are both admin. There are eight
pages on the management page, which are "Quick Configuration", "Mode Selection", "Wireless Access Point Settings",
"Wireless Terminal Settings", "Serial Port and Network Settings", "Ethernet Function Settings", "HTTPD Client Mode",
"Advanced Settings" and "Module Management".

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the USR IOT USR-W630 and is the answer not in the manual?

USR IOT USR-W630 Specifications

General IconGeneral
BrandUSR IOT
ModelUSR-W630
CategoryMedia Converter
LanguageEnglish

Related product manuals