USR IOT USR-W630 - Data Transmission Test

USR-W630 User Manual Technical Support: h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
6
Figure 3 connect to the wifi of W630
Link indicator light will light up when PC join the wifi of W630.
1.3. Data Transmission Test
The default encryption mode of W610:open, none
The default serial port parameters:57600,8,1,None
The default network parameters: TCP,Server,8899,10.10.100.254
Steps of testing
1\open”USR-TCP232-Test.exe”, COM11 represents the serial number of W610,set the baud rate 57600,then open the
serial port;
2\choose TCP Client mode, IP:10.10.100.254,the server port is 8899,then click connect.
The data from serial port to net is: serial port of PC->serial port of W630->W630->network port(or wifi) of W630->PC;
The data from net to serial port is: PC-> network port(or wifi) of W630->W630->serial port of W630->serial port of PC