2.AIR CLEANER(See 3 page)
3.SPARK PLUG
SPARK PLUG TYPE: F7RTC
5.Reinstall the spark
plug and plug cap.
1.Remove the spark plug cap.
.8m_.031in)
4.Measure the gap.
2.Remove the spark plug.
3.Clean the deposit.
4.FUEL STRAINER
1.Turn the fuel valve
to the OFF position
and remove the
sediment cup and _:,(_J'
filter screen.
3.Install the fuel filter screen and sediment cup.
8.STORAGE
2.Clean the sediment
cup and fuel filter
screen.
1.Close the fuel valve, drain
the fuel from the fuel tank.
2.Drain the fuel from the carburetor.
4.Tighten the oil drain plug
and fill the engine with
new oil to the filler neck.
5.Pull the starter grip carefully
until resistance is felt.
Warranty and Service Questions ?
Missing or Damaged parts
Call 866 797 2738
3.Remove the oil filler cap
and drain plug to drain
the oil.
6. Store the generator
in a clean area.
To Next Page
Loading...
Need help?
General
