UTC Fire and Security Interlogix ATS125 Series User Manual

4 / 56 P/N 1070341 • REV 2.0 • ISS 22FEB11
10
1. DGP Options Output Controllers
Batch Number System Code
Alarm Code Prefix Digits Start Card Number
Poll RAS Number of Cards
RAS with LCD Start User Number
RAS with RTE
Toggle RAS
Dual Zone Multiple Badge Time
Card to PIN Time Re-lock Delay Time
Two Cards Time Region Count Limit
2. Door Options Select Door x, x, x, x
1. Access Options Unlock Time Out Reader Card & PIN
Extended Unlock Time In Reader No PIN If TZ
Shunting Out Reader No PIN If TZ
Shunt Time In Reader Inhibit Region 0 Users
Extended Shunt Time` Out Reader Inhibit Region 0 Users
Shunt Warning Time Anti-Passback Time
Shunt Until Door Closed In Region
Cancel Shunt After Door Secures Out Region
Low Security Timezone In Reader Two Cards
In Reader Card & PIN Out Reader Two Cards
2. Request to Exit Options RTE Timezone RTE Times Door Open
In RTE Disabled When Armed RTE Reporting
Out RTE Disabled When Armed
3. Alarm Control Alarm Group Exit Denied if Area Armed
Reader Has No Alarm Control RAS Number Disabled
Entry Denied if Area Armed
4. Reader Options Zone Holds Door Unlocked Report Forced Door
Door Unlocked Until Door Opens Report DOTL
Unlock Timezone Reader LED Options
Unlock Timezone After Entry Pulsed Lock & Unlock Relays
Report Door closed & locked Time & Attendance Reader
Map Open/Unlocked to Unlocked Reader Duress
Report Door Open/Close
5. Hardware Options Unlock Relay Number DOTL Zone
Zone Number DOTL Output
3. Initialise Database Monitor 2nd Door Zone RTE Zone
4. Display Card Forced Output Number Interlock Zone
5. Door Groups Shunt Zone Areas
6. Reserved Warning Output Number Fault Output Number
7. System Options Mains Fail Output Number
Low Battery Output Number
Tamper Output Number
8. Macro Logic
9. Version Number
10. To Local Devices

UTC Fire and Security Interlogix ATS125 Series Specifications

General

Brand	UTC Fire and Security
Model	Interlogix ATS125 Series
Category	Security System
Language	English