UTC Fire and Security Interlogix ATS1235 User Manual

© 2011 UTC Fire & Security. All rights reserved. 1 / 32 P/N 1070346 • REV 5.0 • ISS 03OCT11
ATS1235 Advanced Wireless DGP on 868 MHz
AM Installation Sheet
EN DE FR IT NL
1
12V
CON3 CON1
0V
D+
D-
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
ON
12345678
()9
()10
2
(2)
(1)
(3)
3
METAL METAL
4
ON
5678
“0”
“1”
Address 1
ON
5678
“0”
“1”
Address 2

UTC Fire and Security Interlogix ATS1235 Specifications

General

Brand	UTC Fire and Security
Model	Interlogix ATS1235
Category	Security System
Language	English

Summary

Wiring, Addressing, and Powering Up

Wiring Specifications

Details cable types and maximum data bus length for ATS1235.

Addressing ATS1235

Procedure for assigning unique addresses using DIP switches.

Zone Numbering

Powering Up the ATS1235

Steps for connecting power after wiring is confirmed.

Sensor and Zone Configuration

Configuring Wireless Sensor/Zone (Advisor Advanced)

Steps to configure sensors and zones on Advisor Advanced panels.

Configuring Wireless Sensor/Zone (Advisor Master)

Steps to configure sensors and zones on Advisor Master panels.

Selecting the Wireless DGP Menu

Installer Menu 19: Remote Device Menu

Detailed programming steps for the Remote Device Menu.

Menu 2, Program Zones

Learn or delete wireless sensor zones.

System Menus and Features

Menu 3, View RF Devices

Menu 4, View Zone Status

Menu 5, View Signal Level

Menu 6, Program Fob

Program key fob buttons to control relays or users.

Supervision Time

Advanced Settings and Support

Menu 8, Short Supervision Time

Menu 9, Long Supervision Time

Menu 10, Smoke Supervision Time

Menu 11, Supervision Options

Menu 13, DGP Settings

Configure DGP modes for 16 or 32 zones.

Menu 14, Factory Defaults