MASTER plastering machine
21
8 EC Declaration of Conformity
As under the EC Directive on machinery 98/37 EEC
Company:
Utiform Technologies, S.L.
Pol. Ind. Las Maromas, Esq. Francia-Irlanda
03160 ALMORADÍ (Alicante) SPAIN
Declares under its own and only responsibility, that the construction of the following machine
Model : MASTER
Machine number ..........................................................................
Description : Mixing pump for premixed bagged materials
Abides by all essential R.D. 1435/92 (27-11-92) Machinery Safety regulations, which were
modified by the R.D. 56/95 (20-01-95) and the R.D. 1215/97 (18-07-97), by which all minimum
safety and health conditions for workers in use of this kind of equipment.
Furthermore, it complies with the provisions of the following EC statutes:
98/37 EEC Directive (22-06-98) related to the harmonization of the Member States legal systems
on machinery, which was amended by the 98/79 directive (27-10-98).
73/23/EEC Directive (19-02-73) related to the harmonization of the Member Estates legal
systems on electric materials to be used with certain voltage limits (low voltage), amended by the
93/68/EEC (22-07-93).
Harmonized rules particularly applied (or part of them):
EN 292-1 EN 292-2 EN-292-2/A1 EN-294
EN-418 EN-842 EN-60204-1
This declaration of consent is limited to what testing responsibility respects, in the event that
the seller or supplier at his/her own risk and without express authorisation performs any changes to
the machine, uses the machines to other effects than what intended or works in a different country
outside the territory where the CE 98/37 CEE are enforceable, or in the event of repair by a third non-
authorised party assembling spare and wear parts.
In Almoradi, on the......................................... 2007
Miguel Ángel Peco
Technical Engineer
To Next Page
Loading...